Rebuild kernel-2.6.32.26-174.xendom0.fc12.src.rpm on RHEL Server 6

November 29, 2010

This post follows up “Howto” http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial ( [1] ).
Install kernel-2.6.32.26-174.xendom0.fc12.src.rpm on RHEL 6 Server.

# wget http://fedorapeople.org/~myoung/dom0/src/kernel-2.6.32.26-174.xendom0.fc12.src.rpm
# rpm -iv kernel-2.6.32.26-174.xendom0.fc12.src.rpm

*********************************************************************************************
UPDATE @ 12/01/10
Straight forward build with option “– with firmware” :
# rpmbuild -bb –with firmware kernel.spec
allows to get all rpms been built and installed, including kernel-firmware.rpm
*********************************************************************************************
Actually , we have two options to perform this rebuild on RHEL 6 Server.
************
Option 1
************
Apply manually following patch to kernel.spec. It changes just one line in code. Remove the one with (-) and add the one with (+).

--- kernel.spec.orig 2010-11-23 16:36:51.000000000 +0300
+++ kernel.spec 2010-11-29 21:50:28.609899657 +0300
@@ -466,7 +466,7 @@
# Packages that need to be installed before the kernel is, because the %post
# scripts use them.
#
-%define kernel_prereq fileutils, module-init-tools, initscripts >= 8.11.1-1, kernel-firmware >= %{rpmversion}-%{pkg_release}, grubby >= 7.0.4-1
+%define kernel_prereq fileutils, module-init-tools, initscripts >= 8.11.1-1,grubby >= 7.0.4-1
%if %{with_dracut}
%define initrd_prereq dracut >= 002 xorg-x11-drv-ati-firmware
%else

Install EPEL Repos to succeed with build

rpm -Uvh http://download.fedora.redhat.com/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm

After compile and install, disable the epel repo change /etc/yum.repos.d/epel.repo to ‘enabled=0′ and then run ‘yum clean all && yum update’
Now run :-

# rpmbuild -bb ./kernel.spec
# cd ../RPMS/x86_64

and install generated RPMS :-
[root@ServerTest x86_64]# ./inst.sh
Loaded plugins: refresh-packagekit, rhnplugin
Setting up Install Process
Examining kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-2.6.32-71.el6.x86_64
Examining kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed
Examining kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed
Examining kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-devel-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-devel-2.6.32-71.el6.x86_64
Examining kernel-headers-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-headers-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-headers-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-headers-2.6.32-71.el6.x86_64
Resolving Dependencies
–> Running transaction check
—> Package kernel.x86_64 0:2.6.32.26-174.xendom0.el6 set to be installed
—> Package kernel-debuginfo.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated
—> Package kernel-debuginfo-common-x86_64.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated
—> Package kernel-devel.x86_64 0:2.6.32.26-174.xendom0.el6 set to be installed
—> Package kernel-headers.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated
–> Finished Dependency Resolution

Dependencies Resolved

===================================================================================================================
Package Arch Version Repository Size
===================================================================================================================
Installing:
kernel x86_64 2.6.32.26-174.xendom0.el6 /kernel-2.6.32.26-174.xendom0.el6.x86_64 91 M
kernel-debuginfo x86_64 2.6.32.26-174.xendom0.el6 /kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 1.1 G
kernel-debuginfo-common-x86_64 x86_64 2.6.32.26-174.xendom0.el6 /kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64 151 M
kernel-devel x86_64 2.6.32.26-174.xendom0.el6 /kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 22 M
Updating:
kernel-headers x86_64 2.6.32.26-174.xendom0.el6 /kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 2.3 M

Transaction Summary
===================================================================================================================
Install 4 Package(s)
Upgrade 1 Package(s)

Total size: 1.4 G
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : kernel-2.6.32.26-174.xendom0.el6.x86_64 1/6

grubby fatal error: unable to find a suitable template => May be ignored

Installing : kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64 2/6
Installing : kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 3/6
Updating : kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 4/6
Installing : kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 5/6
Cleanup : kernel-headers-2.6.32-71.el6.x86_64 6/6

Installed: kernel.x86_64
0:2.6.32.26-174.xendom0.el6
kernel-debuginfo.x86_64 0:2.6.32.26-174.xendom0.el6
kernel-debuginfo-common-x86_64.x86_64 0:2.6.32.26-174.xendom0.el6
kernel-devel.x86_64 0:2.6.32.26-174.xendom0.el6

Updated:
kernel-headers.x86_64 0:2.6.32.26-174.xendom0.el6

Complete!

Reboot with new kernel

title Xen 4.0.1 with Red Hat Enterprise Linux (vmlinuz-2.6.32.26-174.xendom0.el6.x86_64)
root (hd1,7)
kernel /xen.gz dom0_mem=1024M loglvl=all guest_loglvl=all
module /vmlinuz-2.6.32.26-174.xendom0.el6.x86_64 ro root=/dev/mapper/vg_servertest-lv_root rd_LVM_LV=vg_servertest/lv_root
module /initramfs-2.6.32.26-174.xendom0.el6.x86_64.img

[root@ServerTest ~]# xm info
host : ServerTest
release : 2.6.32.26-174.xendom0.el6.x86_64
version : #1 SMP Mon Nov 29 20:12:24 MSK 2010
machine : x86_64
nr_cpus : 4
nr_nodes : 1
cores_per_socket : 4
threads_per_core : 1
cpu_mhz : 2833
hw_caps : bfebfbff:20100800:00000000:00000940:0008e3fd:00000000:00000001:00000000
virt_caps : hvm
total_memory : 8190
free_memory : 7070
node_to_cpu : node0:0-3
node_to_memory : node0:7070
node_to_dma32_mem : node0:3259
max_node_id : 0
xen_major : 4
xen_minor : 0
xen_extra : .1
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : unavailable
xen_commandline : dom0_mem=1024M loglvl=all guest_loglvl=all
cc_compiler : gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC)
cc_compile_by : root
cc_compile_domain : (none)
cc_compile_date : Mon Nov 29 10:24:07 MSK 2010
xend_config_format : 4





********************************************************
Option 2. Installation with no hackery at all.
********************************************************

# rpmbuild -bb --with firmware kernel.spec

# cd ../RPMS/x86_64
yum install \
kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm \
kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64.rpm \
kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64.rpm \
kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm \
kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64.rpm \
kernel-headers-2.6.32.26-174.xendom0.el6.x86_64.rpm

. . . . . .
Setting up Install Process
Examining kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-2.6.32-71.el6.x86_64
Marking kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-2.6.32-71.7.1.el6.x86_64
Examining kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed
Examining kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed
Examining kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-devel-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-devel-2.6.32-71.el6.x86_64
Marking kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-devel-2.6.32-71.7.1.el6.x86_64
Examining kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed
Examining kernel-headers-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-headers-2.6.32.26-174.xendom0.el6.x86_64
Marking kernel-headers-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-headers-2.6.32-71.7.1.el6.x86_64
Resolving Dependencies
--> Running transaction check
---> Package kernel.x86_64 0:2.6.32.26-174.xendom0.el6 set to be installed
---> Package kernel-debuginfo.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated
---> Package kernel-debuginfo-common-x86_64.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated
---> Package kernel-devel.x86_64 0:2.6.32.26-174.xendom0.el6 set to be installed
---> Package kernel-firmware.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated
---> Package kernel-headers.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated
--> Finished Dependency Resolution

Dependencies Resolved

=================================================================================================================
Package Arch Version Repository Size
=================================================================================================================
Installing:
kernel x86_64 2.6.32.26-174.xendom0.el6 /kernel-2.6.32.26-174.xendom0.el6.x86_64 91 M
kernel-debuginfo x86_64 2.6.32.26-174.xendom0.el6 /kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 1.1 G
kernel-debuginfo-common-x86_64
x86_64 2.6.32.26-174.xendom0.el6 /kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64
151 M
kernel-devel x86_64 2.6.32.26-174.xendom0.el6 /kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 22 M
kernel-firmware x86_64 2.6.32.26-174.xendom0.el6 /kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64 2.2 M
Updating:
kernel-headers x86_64 2.6.32.26-174.xendom0.el6 /kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 2.3 M

Transaction Summary
=================================================================================================================
Install 5 Package(s)
Upgrade 1 Package(s)

Total size: 1.4 G
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64 1/7
Installing : kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64 2/7
Installing : kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 3/7
Updating : kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 4/7
Installing : kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 5/7
Installing : kernel-2.6.32.26-174.xendom0.el6.x86_64 6/7
Cleanup : kernel-headers-2.6.32-71.7.1.el6.x86_64 7/7

Installed:
kernel.x86_64 0:2.6.32.26-174.xendom0.el6
kernel-debuginfo.x86_64 0:2.6.32.26-174.xendom0.el6
kernel-debuginfo-common-x86_64.x86_64 0:2.6.32.26-174.xendom0.el6
kernel-devel.x86_64 0:2.6.32.26-174.xendom0.el6
kernel-firmware.x86_64 0:2.6.32.26-174.xendom0.el6
Updated:
kernel-headers.x86_64 0:2.6.32.26-174.xendom0.el6
Complete!






References
1. http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial


Set up Solaris 11 Express PV Guest at Xen 4.0.1 (2.6.32.26 pvops) Dom0 on top of F14

November 26, 2010

Following bellow is brief instruction of Solaris 11 Express PV Guest install via virsh and XML profiling at Xen 4.0.1 Dom0 on top of Fedora 14. Pvops kernel 2.6.32.26 has been built via Jeremy Fitzhardinge Git Repos. It also may be installed per Michael Young . View http://repos.fedorapeople.org/repos/myoung/dom0-kernel/fedora-12/SRPMS/
Kernel rpms may be built via kernel-2.6.32.26-174.xendom0.fc12.src.rpm rebuild on F14.
First copy off the disk to Dom0 required files.

mount -o loop,ro sol-11-exp-201011-live-x86.iso /mnt
cd /mnt
cp ./platform/i86pc/amd64/boot_archive /home/boris/solaris11
cp ./platform/i86xpv/kernel/amd64/unix /home/boris/solaris11

Solaris 11 installation profile

[root@fedora14sdb solaris11]# cat installSolaris.xml
<domain type='xen' >
<name>Solaris11</name>
<memory>1048576</memory>
<currentMemory>1048576</currentMemory>
<vcpu>2</vcpu>
<bootloader></bootloader>
<os>
<type>linux</type>
<kernel>/home/boris/solaris11/unix</kernel>
<initrd>/home/boris/solaris11/boot_archive</initrd>
<cmdline>/platform/i86xpv/kernel/amd64/unix -B console=ttya,livemode=text</cmdline>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>destroy</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<disk type='file' device='cdrom'>
<driver name='file'/>
<source file='/root/Downloads/sol-11-exp-201011-live-x86.iso'/>
<target dev='xvdc' bus='xen'/>
<readonly/>
</disk>
<disk type='block' device='disk'>
<driver name='phy'/>
<source dev='/dev/sdb6'/>
<target dev='xvda' bus='xen'/>
</disk>
<interface type='bridge'>
<mac address='00:16:3e:6b:b2:b6'/>
<source bridge='eth0'/>
<script path='/etc/xen/scripts/vif-bridge'/>
<target dev='vif8.0'/>
</interface>
<console type='pty' tty='/dev/pts/1'>
<source path='/dev/pts/1'/>
<target type='xen' port='0'/>
</console>
</devices>
</domain>

# virsh create installSolaris.xml
# virsh console Solaris11

[root@fedora14 solaris11]# virsh create installSolaris.xml
Domain Solaris11 created from installSolaris.xml

[root@fedora14 solaris11]# virsh console Solaris11
Connected to domain Solaris11
Escape character is ^]
v4.0.1 chgset 'unavailable'
SunOS Release 5.11 Version snv_151a 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
Hostname: solaris
Remounting root read/write
Probing for device nodes ...
Preparing live image for use
Done mounting Live image
USB keyboard
1. Albanian 25. Latin-American
2. Arabic 26. Lithuanian
3. Belarusian 27. Latvian
4. Belgian 28. Macedonian
5. Brazilian 29. Malta_UK
6. Bulgarian 30. Malta_US
7. Canadian-Bilingual 31. Norwegian
8. Croatian 32. Polish
9. Czech 33. Portuguese
10. Danish 34. Romanian
11. Dutch 35. Russian
12. Dvorak 36. Serbia-And-Montenegro
13. Estonian 37. Slovak
14. Finnish 38. Slovenian
15. French 39. Spanish
16. French-Canadian 40. Swedish
17. Hungarian 41. Swiss-French
18. German 42. Swiss-German
19. Greek 43. Traditional-Chinese
20. Icelandic 44. TurkishF
21. Italian 45. TurkishQ
22. Japanese-type6 46. UK-English
23. Japanese 47. US-English
24. Korean
To select the keyboard layout, enter a number [default 47]:
1. Arabic 12. Hungarian
2. Catalan 13. Indonesian
3. Chinese - Simplified 14. Italian
4. Chinese - Traditional 15. Japanese
5. Czech 16. Korean
6. Dutch 17. Polish
7. English 18. Portuguese - Brazil
8. French 19. Russian
9. German 20. Slovak
10. Greek 21. Spanish
11. Hebrew 22. Swedish
To select the language you wish to use, enter a number [default is 7]:
User selected: English
Configuring devices.
solaris console login: jack
Password:
Oracle Corporation SunOS 5.11 snv_151a November 2010
jack@solaris:~$ cp .Xclients .vnc/xstartup
jack@solaris:~$ vncserver

Open another terminal session and connect via vncviewer to DomU to proceed with install :-



Runtime XML profile

<domain type='xen'>
<name>Solaris11</name>
<memory>2097152</memory>
<currentMemory>2097152</currentMemory>
<vcpu>2</vcpu>
<bootloader></bootloader>
<os>
<type>linux</type>
<kernel>/home/boris/solaris11/unix</kernel>
<initrd>/home/boris/solaris11/boot_archive</initrd>
<cmdline>/platform/i86xpv/kernel/amd64/unix -B zfs-bootfs=rpool/ROOT/solaris,bootpath=/xpvd/xdf@51712:a</cmdline>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<disk type='block' device='disk'>
<driver name='phy'/>
<source dev='/dev/sdb6'/>
<target dev='xvda' bus='xen'/>
</disk>
<interface type='bridge'>
<mac address='00:16:3e:16:da:3d'/>
<source bridge='eth0'/>
<script path='/etc/xen/scripts/vif-bridge'/>
<target dev='vif15.0'/>
</interface>
<console type='pty' tty='/dev/pts/1'>
<source path='/dev/pts/1'/>
<target type='xen' port='0'/>
</console>
</devices>
</domain>

[root@fedora14sdb solaris11]# virsh define Solaris11.xml
Domain Solaris11 defined from Solaris11.xml

[root@fedora14sdb solaris11]# virsh start Solaris11
Domain Solaris11 started

[root@fedora14sdb solaris11]# virsh console Solaris11
Connected to domain Solaris11
Escape character is ^]
v4.0.1 chgset ‘unavailable’
SunOS Release 5.11 Version snv_151a 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
Hostname: solaris
solaris console login:

Serial console has been activated for virt-manager entry Solaris11 :-





VNC Setup

cat /etc/gdm/custom.conf
# GDM Custom Configuration file.
# overrides: /usr/share/gdm/defaults.conf
[daemon]
RemoteGreeter=/usr/lib/gdm-simple-greeter
[security]
DisallowTCP=false
# AllowRoot=true
# AllowRemoteRoot=true
[xdmcp]
Enable=true
[gui]
[greeter]
[chooser]
[debug]
[servers]

Services restart:-
svcadm disable xvnc-inetd gdm
svcadm enable xvnc-inetd gdm

[root@fedora14sdb solaris11]# cat ./vnc-gnome.sh
domid=`virsh domid Solaris11`
ip=`/usr/bin/xenstore-read /local/domain/$domid/guest/ipv4/0/address`
echo $ip
vncviewer $ip:0
[root@fedora14sdb solaris11]# ./vnc-gnome.sh






Maintain kernel-2.6.37-0.(x).rc(x).git(y).xendom0.fc14.src.rpm in sync with tip of mainline development tree 2.6.37

November 7, 2010

Download from http://koji.fedoraproject.org/koji/taskinfo?taskID=2581021
file kernel-6.37-0.1.rc1.git0.xendom0.fc15.src.rpm been built by Michael Young and install it.
In mean time following patches :-
patch-2.6.37-rc1.bz2
patch-2.6.37-rc1-git5.bz2
should be downloaded from http://kernel.org and copied to /root/rpmbuild/SOURCES folder
Update /root/rpmbuild/SPECS/kernel.spec correspondently

--- kernel.spec.orig	2010-11-07 18:22:25.965480016 +0300
+++ kernel.spec	2010-11-07 17:23:50.546673325 +0300
@@ -85,7 +85,7 @@
 # The rc snapshot level
 %define rcrev 1
 # The git snapshot level
-%define gitrev 0
+%define gitrev 5
 # Set rpm version accordingly
 %define rpmversion 2.6.%{upstream_sublevel}
 %endif

At this point you should be able to build new kernel RPMS

# rpmbuild -bb ./kernel.spec
. . . . .
Wrote: /root/rpmbuild/RPMS/x86_64/kernel-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm
Wrote: /root/rpmbuild/RPMS/x86_64/kernel-headers-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm
Wrote: /root/rpmbuild/RPMS/x86_64/kernel-debuginfo-common-x86_64-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm
Wrote: /root/rpmbuild/RPMS/x86_64/perf-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm
Wrote: /root/rpmbuild/RPMS/x86_64/kernel-devel-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm
Wrote: /root/rpmbuild/RPMS/x86_64/kernel-debuginfo-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.vzYwPP
+ umask 022
+ cd /root/rpmbuild/BUILD
+ cd kernel-2.6.36.fc14
+ rm -rf /root/rpmbuild/BUILDROOT/kernel-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64
+ exit 0

Install new kernel :-

yum install kernel-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm \
kernel-debuginfo-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm \
kernel-debuginfo-common-x86_64-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm \
kernel-devel-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm \
kernel-headers-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm \
perf-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.rpm

Dependencies Resolved

====================================================================================
Package Arch Version Repository Size
====================================================================================
Installing:
kernel x86_64 2.6.37-0.1.rc1.git5.xendom0.fc14 /kernel-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 107 M
kernel-devel x86_64 2.6.37-0.1.rc1.git5.xendom0.fc14 /kerneldevel-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 24 M
Updating:
kernel-debuginfo x86_64 2.6.37-0.1.rc1.git5.xendom0.fc14 /kernel-debuginfo-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 1.5 G
kernel-debuginfo-common x86_64 x86_64 2.6.37-0.1.rc1.git5.xendom0.fc14 /kernel-debuginfo-common-x86_64-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 196 M
kernel-headers x86_64 2.6.37-0.1.rc1.git5.xendom0.fc14 /kernel-headers-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 2.4 M
perf x86_64 2.6.37-0.1.rc1.git5.xendom0.fc14 /perf-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 747 k

Removing:
kernel x86_64 2.6.37-0.1.rc0.git13.xendom0.fc14 @/kernel-2.6.37-0.1.rc0.git13.xendom0.fc14.x86_64 100 M

kernel-devel x86_64 2.6.37-0.1.rc0.git13.xendom0.fc14 @/kernel- devel-2.6.37-0.1.rc0.git13.xendom0.fc14.x86_64 24 M

Transaction Summary
===================================================================================
Install 2 Package(s)
Upgrade 4 Package(s)
Remove 2 Package(s)
Total size: 1.8 G
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Updating : kernel-debuginfo-common-x86_64-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 1/12
Updating : perf-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 2/12
Installing : kernel-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 3/12
Updating : kernel-debuginfo-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 4/12
Installing : kernel-devel-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 5/12
Updating : kernel-headers-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 6/12
Cleanup : kernel-debuginfo-2.6.37-0.1.rc1.git0.xendom0.fc14.x86_64 7/12
Cleanup : perf-2.6.37-0.1.rc1.git0.xendom0.fc14.x86_64 8/12
Cleanup : kernel-debuginfo-common-x86_64-2.6.37-0.1.rc1.git0.xendom0.fc14.x86_64 9/12
Cleanup : kernel-devel-2.6.37-0.1.rc0.git13.xendom0.fc14.x86_64 10/12
Cleanup : kernel-headers-2.6.37-0.1.rc1.git0.xendom0.fc14.x86_64 11/12
Cleanup : kernel-2.6.37-0.1.rc0.git13.xendom0.fc14.x86_64 12/12
Removed:
kernel.x86_64 0:2.6.37-0.1.rc0.git13.xendom0.fc14 kernel-devel.x86_64 0:2.6.37-0.1.rc0.git13.xendom0.fc14
Installed:
kernel.x86_64 0:2.6.37-0.1.rc1.git5.xendom0.fc14 kernel-devel.x86_64 0:2.6.37-0.1.rc1.git5.xendom0.fc14
Updated:
kernel-debuginfo.x86_640:2.6.37-0.1.rc1.git5.xendom0.fc14
kernel-debuginfo-common-x86_64.x86_64 0:2.6.37-0.1.rc1.git5.xendom0.fc14
kernel-headers.x86_64 0:2.6.37-0.1.rc1.git5.xendom0.fc14
perf.x86_64 0:2.6.37-0.1.rc1.git5.xendom0.fc14
Complete!

Create grub entry

title Xen 4.0.1 Fedora 14 (vmlinuz-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64)
root (hd0,8)
kernel /xen.gz dom0_mem=1024M
module /vmlinuz-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64 ro root=/dev/mapper/vg_fedora14-lv_root LANG=US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us
module /initramfs-2.6.37-0.1.rc1.git5.xendom0.fc14.x86_64.img

Set initdefault to 3 via /etc/inittab and boot system into new kernel under Xen 4.0.1 :-





****************************
UPDATE on 11/11/2010
****************************
I have to notice that for rc1 git revision 7 and 8 patch linux-2.6-crash-driver.patch should be disabled
like this:-
# ApplyPatch linux-2.6-crash-driver.patch
in kernel.spec.
****************************
UPDATE on 11/14/2010
****************************
To build fedora kernel via the most recent MY’s http://koji.fedoraproject.org/koji/taskinfo?taskID=2598434 src.rpm for rcrev=1 and gitrev=11 without applying upstream patch i had to patch the kernel.spec as follows

--- kernel.spec.orig	2010-11-13 01:19:22.000000000 +0300
+++ kernel.spec	2010-11-14 19:46:45.613917250 +0300
@@ -85,7 +85,7 @@
 # The rc snapshot level
 %define rcrev 1
 # The git snapshot level
-%define gitrev 8
+%define gitrev 11
 # Set rpm version accordingly
 %define rpmversion 2.6.%{upstream_sublevel}
 %endif
@@ -378,6 +378,9 @@
 
 # Should make listnewconfig fail if there's config options
 # printed out?
+
+%define nopatches 1
+
 %if %{nopatches}%{using_upstream_branch}
 %define listnewconfig_fail 0
 %else
@@ -1301,7 +1304,7 @@
 ApplyPatch dmar-disable-when-ricoh-multifunction.patch
 
 # Xen patches
-ApplyPatch xen.next-2.6.37.patch
+# ApplyPatch xen.next-2.6.37.patch
 #ApplyPatch xen.upstream.core.patch
 #ApplyPatch xen.pcifront.fixes.patch
 #ApplyPatch xen.pvhvm.fixes.patch

Attempt to load 2.6.37-rc1 under Xen 4.0.1 on top of Ubuntu 10.04.1 Server

November 2, 2010

Xen Core Dom0 support features started to merge mainline Linux during 2.6.37 merge window. In particular, kernel may be loaded under Xen, daemon xend starts in Dom0. However, xen backend devices are not yet in the vanilla kernel. It’s impossible to create and start guests. Please, view for details Re: [PATCH v4 00/10] xen: initial domain support
Kernel tuning to be loaded under Xen 4.0.1




# apt-get install libcurl4-openssl-dev \
xserver-xorg-dev \
mercurial gitk \
build-essential \
libncurses5-dev \
uuid-dev gawk \
gettext texinfo bcc \
libncurses5-dev dpkg-dev debhelper \
iasl texinfo bridge-utils bison flex
# aptitude install kernel-package fakeroot
# cd ./linux-2.6.37-rc1
# make-kpkg clean
# fakeroot make-kpkg --initrd kernel-image kernel-headers
# dpkg -i ../linux-image-2.6.37-rc1_2.6.37-rc1-10.00.Custom_amd64.deb

Grub Entry for Xen

menuentry "Xen 4.0.1 / Ubuntu 10.04 kernel 2.6.37-rc1" {
insmod ext2
set root='(hd1,1)'
multiboot (hd1,1)/boot/xen.gz dummy=dummy dom0_mem=1024M
module (hd1,1)/boot/vmlinuz-2.6.37-rc1 dummy=dummy root=/dev/sdb1 ro text
module (hd1,1)/boot/initrd.img-2.6.37-rc1
}

Snapshot done via VNC connection :-



Dmesg log :-

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.37-rc1 (root@ServerLLX) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Tue Nov 2 12:11:23 MSK 2010
Command line: dummy=dummy root=/dev/sdb1 ro text
released 0 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009ec00 (usable)
Xen: 000000000009ec00 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000040000000 (usable)
Xen: 00000000cfe70000 - 00000000cfe7e000 (ACPI data)
Xen: 00000000cfe7e000 - 00000000cfed0000 (ACPI NVS)
Xen: 00000000cfed0000 - 00000000d0000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: P5Q3/System Product Name, BIOS 0804 08/10/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x40000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 0f7ff000
init_memory_mapping: 0000000000000000-0000000040000000
0000000000 - 0040000000 page 4k
kernel direct mapping tables up to 40000000 @ f5fd000-f7ff000
RAMDISK: 01e98000 - 0e9f9000
ACPI: RSDP 00000000000fb1e0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cfe70100 0005C (v01 A_M_I_ OEMXSDT 08000910 MSFT 00000097)
ACPI: FACP 00000000cfe70290 000F4 (v03 A_M_I_ OEMFACP 08000910 MSFT 00000097)
ACPI: DSDT 00000000cfe70440 0A990 (v01 A1098 A1098001 00000001 INTL 20051117)
ACPI: FACS 00000000cfe7e000 00040
ACPI: APIC 00000000cfe70390 0006C (v01 A_M_I_ OEMAPIC 08000910 MSFT 00000097)
ACPI: MCFG 00000000cfe70400 0003C (v01 A_M_I_ OEMMCFG 08000910 MSFT 00000097)
ACPI: OEMB 00000000cfe7e040 00081 (v01 A_M_I_ AMI_OEM 08000910 MSFT 00000097)
ACPI: HPET 00000000cfe7add0 00038 (v01 A_M_I_ OEMHPET 08000910 MSFT 00000097)
ACPI: OSFR 00000000cfe7ae10 000B0 (v01 A_M_I_ OEMOSFR 08000910 MSFT 00000097)
ACPI: SSDT 00000000cfe7e9d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000040000000
Initmem setup node 0 0000000000000000-0000000040000000
NODE_DATA [000000003ffec000 - 000000003fffffff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x00040000
On node 0 totalpages: 262030
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3920 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 255, address 0xfec00000, GSI 0-255
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 272
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:8fe70000)
Booting paravirtualized kernel on Xen
Xen version: 4.0.1 (preserve-AD)
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88003ff6f000 s82752 r8192 d23744 u114688
pcpu-alloc: s82752 r8192 d23744 u114688 alloc=28*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 258440
Policy zone: DMA32
Kernel command line: dummy=dummy root=/dev/sdb1 ro text
PID hash table entries: 4096 (order: 3, 32768 bytes)
Placing 64MB software IO TLB between ffff88003a600000 - ffff88003e600000
software IO TLB at phys 0x3a600000 - 0x3e600000
Memory: 741008k/1048576k available (4462k kernel code, 456k absent, 307112k reserved, 6442k data, 1564k init)
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
NR_IRQS:16640 nr_irqs:1024 16
xen: sci override: global_irq=9 trigger=0 polarity=0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> irq=9
xen: acpi sci 9
xen: --> irq=1
xen: --> irq=2
xen: --> irq=3
xen: --> irq=4
xen: --> irq=5
xen: --> irq=6
xen: --> irq=7
xen: --> irq=8
xen_map_pirq_gsi: returning irq 9 for gsi 9
xen: --> irq=9
xen: --> irq=10
xen: --> irq=11
xen: --> irq=12
xen: --> irq=13
xen: --> irq=14
xen: --> irq=15
Console: colour dummy device 80x25
console [tty0] enabled
allocated 10485760 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
Detected 2833.068 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.13 BogoMIPS (lpj=2833068)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
ACPI: Core revision 20101013
cpu 0 spinlock event irq 1022
installing Xen timer for CPU 1
cpu 1 spinlock event irq 1016
installing Xen timer for CPU 2
cpu 2 spinlock event irq 1010
installing Xen timer for CPU 3
cpu 3 spinlock event irq 1004
Brought up 4 CPUs
Grant table initialized
regulator: core version 0.5
regulator: dummy:
Time: 9:47:17 Date: 11/02/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000cfe7e0d0 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000cfe7e310 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
ACPI: SSDT 00000000cfe7e550 00235 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00235 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
ACPI: SSDT 00000000cfe7e790 00235 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00235 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xcff00000-0xffffffff]
pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xa800-0xa81f]
pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xa880-0xa89f]
pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0xac00-0xac1f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfe7ffc00-0xfe7fffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xa080-0xa09f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xa480-0xa49f]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfe7ff800-0xfe7ffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x9c00-0x9c07]
pci 0000:00:1f.2: reg 14: [io 0x9880-0x9883]
pci 0000:00:1f.2: reg 18: [io 0x9800-0x9807]
pci 0000:00:1f.2: reg 1c: [io 0x9480-0x9483]
pci 0000:00:1f.2: reg 20: [io 0x9400-0x941f]
pci 0000:00:1f.2: reg 24: [mem 0xfe7fe800-0xfe7fefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: [1002:9498] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe8e0000-0xfe8effff 64bit]
pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
pci 0000:03:00.0: reg 24: [mem 0xfeafe000-0xfeafffff]
pci 0000:03:00.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
pci 0000:02:00.0: reg 18: [mem 0xfe9ff000-0xfe9fffff 64bit]
pci 0000:02:00.0: reg 20: [mem 0xfdef0000-0xfdefffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:05:03.0: [1106:3044] type 0 class 0x000c00
pci 0000:05:03.0: reg 10: [mem 0xfebff800-0xfebfffff]
pci 0000:05:03.0: reg 14: [io 0xec00-0xec7f]
pci 0000:05:03.0: supports D2
pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
pci 0000:05:03.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
xen_balloon: Initialising balloon driver.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xcff00000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
xen: registering gsi 8 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 8 for gsi 8
xen: --> irq=8
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
xen: registering gsi 13 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 13 for gsi 13
xen: --> irq=13
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x03f0-0x03f5]
pnp 00:06: [io 0x03f7]
xen: registering gsi 6 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 6 for gsi 6
xen: --> irq=6
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0290-0x029f]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x004d]
pnp 00:08: [io 0x0050-0x005f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: [io 0x0400-0x03ff disabled]
pnp 00:08: [io 0x0500-0x057f]
pnp 00:08: [mem 0xfed08000-0xfed08fff]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed50000-0xfed8ffff]
pnp 00:08: [mem 0xcff00000-0xcfffffff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [mem 0xffb00000-0xffbfffff]
pnp 00:0a: [mem 0xfff00000-0xffffffff]
pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0b: [mem 0xffc00000-0xffefffff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x03f8-0x03ff]
xen: registering gsi 4 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 4 for gsi 4
xen: --> irq=4
pnp 00:0c: [irq 4]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [io 0x0060]
pnp 00:0e: [io 0x0064]
xen: registering gsi 1 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 1 for gsi 1
xen: --> irq=1
pnp 00:0e: [irq 1]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0f: [mem 0xe0000000-0xefffffff]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:10: [mem 0x00000000-0x0009ffff]
pnp 00:10: [mem 0x000c0000-0x000cffff]
pnp 00:10: [mem 0x000e0000-0x000fffff]
pnp 00:10: [mem 0x00100000-0xcfefffff]
pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0500-0x057f] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:08: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:10: [mem 0x00100000-0xcfefffff] could not be reserved
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:00:1c.0: BAR 14: assigned [mem 0xff800000-0xffbfffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xff600000-0xff7fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0xf000-0xffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.0: bridge window [mem 0xff800000-0xffbfffff]
pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4: bridge window [mem 0xff600000-0xff7fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
xen: registering gsi 16 triggering 0 polarity 1
xen: --> irq=16
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
xen: registering gsi 17 triggering 0 polarity 1
xen: --> irq=17
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xff800000-0xffbfffff]
pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0xff600000-0xff7fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xcff00000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 208260k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1288691238.775:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1854
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Event-channel device installed.
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
xen: --> irq=19
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe900 irq 997
ata2: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe980 irq 997
ata3: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea00 irq 997
ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 997
ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 997
ata6: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7feb80 irq 997
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xen: registering gsi 18 triggering 0 polarity 1
xen: --> irq=18
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.37-rc1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xen: registering gsi 23 triggering 0 polarity 1
xen: --> irq=23
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.37-rc1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xen: registering gsi 21 triggering 0 polarity 1
xen: --> irq=21
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xen: registering gsi 18 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xen: registering gsi 23 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 23 for gsi 23
xen: --> irq=23
Already setup the GSI :23
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xen: registering gsi 19 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 19 for gsi 19
xen: --> irq=19
Already setup the GSI :19
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xen: registering gsi 18 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (7416 buckets, 29664 max)
IPVS: Registered protocols (TCP, UDP, AH, ESP)
IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 2:369:777
rtc_cmos 00:03: setting system clock to 2010-11-02 09:47:18 UTC (1288691238)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata1: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 8-1: new low speed USB device using uhci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
usb 8-1: New USB device found, idVendor=046d, idProduct=c018
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB Optical Mouse
usb 8-1: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1/input0
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: HPA detected: current 488395055, native 488397168
ata4.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
ata4.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 3:0:0:0: [sda] Attached SCSI disk
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 4:0:0:0: [sdb] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1564k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1664k freed
Freeing unused kernel memory: 1904k freed
udevd (93): /proc/93/oom_adj is deprecated, please use /proc/93/oom_score_adj instead.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi8 : pata_jmicron
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90010554000, 90:e6:ba:2d:11:eb, XID 1c4000c0 IRQ 996
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
ata9.00: ATAPI: Optiarc DVD RW AD-5200A, 1.03, max UDMA/66
ata9.00: configured for UDMA/66
scsi 8:0:0:0: CD-ROM Optiarc DVD RW AD-5200A 1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sr 8:0:0:0: Attached scsi generic sg2 type 5
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Adding 3906556k swap on /dev/sdb2. Priority:-1 extents:1 across:3906556k
Adding 4095996k swap on /dev/mapper/vg_fedora13-LogVol02. Priority:-2 extents:1 across:4095996k
udev: starting version 151
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
device eth0 entered promiscuous mode
r8169 0000:02:00.0: eth0: link up
r8169 0000:02:00.0: eth0: link up
br0: port 1(eth0) entering listening state
br0: port 1(eth0) entering listening state
lp: driver loaded but no devices found
xen: registering gsi 22 triggering 0 polarity 1
xen: --> irq=22
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC1200: BIOS auto-probing.
ALSA sound/pci/hda/patch_realtek.c:1524: SKU: Nid=0x1d sku_cfg=0x4015e601
ALSA sound/pci/hda/patch_realtek.c:1526: SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1527: SKU: enable_pcbeep=0x1
ALSA sound/pci/hda/patch_realtek.c:1528: SKU: check_sum=0x00000005
ALSA sound/pci/hda/patch_realtek.c:1529: SKU: customization=0x000000e6
ALSA sound/pci/hda/patch_realtek.c:1530: SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1531: SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1532: SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1533: SKU: override=0x1
ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:4623: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4627: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4628: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4631: dig-out=0x11/0x1e
ALSA sound/pci/hda/hda_codec.c:4632: inputs:
ALSA sound/pci/hda/hda_codec.c:4638:
ALSA sound/pci/hda/patch_realtek.c:1581: realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1597: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV730 0x1002:0x9498).
[drm] register mmio base: 0xFE8E0000
[drm] register mmio size: 65536
ATOM BIOS: 11X
radeon 0000:01:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 477200 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV730 Microcode
radeon 0000:01:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A
[drm] HPD2
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] VGA
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP1: INTERNAL_UNIPHY
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on minor 0
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
irqbalance[3491]: segfault at 4 ip 00007f33beb11116 sp 00007fffd40430c0 error 6 in libc-2.11.1.so[7f33bea6b000+17a000]
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
ppdev: user-space parallel port driver
br0: port 1(eth0) entering learning state
eth0: no IPv6 routers present
br0: no IPv6 routers present
virbr0: no IPv6 routers present
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
ip6_tables: (C) 2000-2006 Netfilter Core Team
lo: Disabled Privacy Extensions


Xen environment

host : ServerLLX
release : 2.6.37-rc1
version : #2 SMP Tue Nov 2 12:11:23 MSK 2010
machine : x86_64
nr_cpus : 4
nr_nodes : 1
cores_per_socket : 4
threads_per_core : 1
cpu_mhz : 2833
hw_caps : bfebfbff:20100800:00000000:00000940:0408e3fd:00000000:00000001:00000000
virt_caps : hvm
total_memory : 8190
free_memory : 7070
node_to_cpu : node0:0-3
node_to_memory : node0:7070
node_to_dma32_mem : node0:3259
max_node_id : 0
xen_major : 4
xen_minor : 0
xen_extra : .1
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : unavailable
xen_commandline : dummy=dummy dom0_mem=1024M
cc_compiler : gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5)
cc_compile_by : root
cc_compile_domain :
cc_compile_date : Tue Oct 5 12:06:55 MSD 2010
xend_config_format : 4


# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.90e6ba2d11eb yes eth0
virbr0 8000.000000000000 yes

# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 1024 4 r----- 14.7


Follow

Get every new post delivered to your Inbox.